Service Manual Info

  Une communauté de partage de manuel de service en ligne.

Xerox WorkCentre M20 Family

Tags : XeroxWorkCentreM20Family4118FaxCentre2218708P87563 
Xerox WorkCentre M20 Family Manuel de service

TéléchargerObtenez le fichier PDF


Xerox WorkCentre M20 Family Service manual 708P87563

This manual is based on a Japanese original. The part names used throughout do not comply with the standard Xerox part naming convention. Because part names have been molded on to some plastic components and may also be embedded in the software, the part names have not been changed. To aid part identification, an acronym list and cross reference lists of more commonly recognised part names have been included in the manual. Refer to GP 20, Acronyms and Parts Description List.

The service manual is the document used as the primary information source for repairing and maintaining this family of products and is available as EDOC on a CDROM, or in printed format.
The information within the manual is divided into an introduction and eight other sections.

Section 1 Service Call Procedures
This section is used to start and complete a service call. The procedures in this section will either direct you to a Repair Analysis Procedure (RAP), or identify a faulty component or subassembly.

Section 2 Status Indicator Repair Analysis Procedures
This section contains the Repair Analysis Procedures (RAPs) and checkouts necessary to diagnose, isolate and repair faults other than image quality faults.

Section 3 Image Quality
This section contains the Image Quality Repair Analysis Procedures (IQ RAPs), checkouts and setup procedures necessary to diagnose, isolate and repair image quality faults.

Section 4 Repairs/Adjustments
This section contains the instructions for removal, replacement, and adjustment of parts within the machine.

Section 5 Parts List
This section contains the detailed and illustrated spare parts list. Any part that is spared or that must be removed to access a spared part is illustrated.

Section 6 General Procedures / Information
This section contains all other procedures, product specifications and general information.

Section 7 Wiring Data
This section contains the wiring diagrams.

Section 8 Accessories
This section contains details of any accessories that the machine may have.


Envoyer un commentaire

Vous devez être connecté pour soumettre des commentaires. Cliquez ici pour vous connecter.

Documents connexes